PRODUCTS
| Rigid PVC Film | UN002 | |||
| Surface | Glossy | |||
| Application | Sleeves film for hot air and steam tunnels | |||
| Properties | Units | Typical Values | Test Methods | |
| Density | g/cm³ | 1.35±0.02 | ASTM D1505 | |
| Tensile Strength | MD | MPa | ≥55 | ASTM D882 |
| TD | ≥140 | |||
| Elongation | MD | % | ≥240 | ASTM D882 |
| TD | ≥40 | |||
| Haze | % | ≤3 | ASTM D1003 | |
| Impact Resistance | Kg.cm | ≥11 | ASTM D1709 | |
| Heat Shrinkage (100℃、30sec) | TD | % | 58±2 | Dipped into water bath at 100℃ for 30 sec |
| MD | % | ≤5 | ||
| Thickness | Mic | 35-50 | - | |
| Maximum Width | mm | 2880 | - | |
| Max Roll Length | m | Thickness 40mic:6000 | ||
| Thickness Tolerance | % | +/- 10 | ASTM D374 | |
| Width Tolerance | mm | 0mm-+ 3.0mm | - | |
| Wrinkle | Strip/m | 0 | - | |
| Unit Weight Tolerance | % | +/- 10 | - | |
| Internal Core Diameter | mm | 76/152 | - | |
| Lateral Edges Alignment | mm | ≤2 | - | |
| Surface Contamination | - | 0 | ||
| Splice | Unit/roll | Standard Length 4000m:≤3, 2000m:≤2 | - | |
| Packing(Standard) | One-way pallets, stretched film protected, rolls laying or staying | |||
| Storage | Film are sensitive to elevated temperatures, Storage above 30 degree and exposure to direct sunlight are not permitted. Layflat-quality may deteriorate after long storage depend on film type, roll length and storage conditions. Usage within 6 months after the indicated production date is recommended. (Best within 3 months after the indicated production date). |
|||